Jeep Compass 2007-2016 Body Panel & Frame Bolt Torque Specifications
Jeep Compass 2007-2016

Jeep Compass 2007-2016 Body & Frame Bolt Torque Specifications

Detailed torque specifications for the body bolts of the 2007-2016 Jeep Compass, including proper tightening sequences and recommended tools.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Suspension System

Components that make up the vehicle's suspension system, including strut/shock absorber and control arms.

1

Strut/Shock Absorber Mounting Bolts

M12 x 1.5
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Secure the strut/shock absorber to the vehicle's body.
2

Control Arm Bolts

M14 x 1.5
Torque Value
85 ft-lbs (115 N·m)
Important Notes
Attach the control arms to the vehicle's body.

Steering System

Components that make up the vehicle's steering system, including steering gear/rack.

1

Steering Gear/Rack Bolts

M12 x 1.5
Torque Value
74 ft-lbs (100 N·m)
Important Notes
Secure the steering gear/rack to the vehicle's body.

Brake System

Components that make up the vehicle's brake system, including brake caliper and brake caliper mounting bracket.

1

Brake Caliper Bolts

M10 x 1.5
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Attach the brake caliper to the vehicle's body.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Value
80 ft-lbs (108 N·m)
Important Notes
Secure the brake caliper mounting bracket to the vehicle's body.

Body Mounts

Components that secure the vehicle's body to the frame.

1

Body Mount Bolts

M14 x 1.5
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Secure the vehicle's body to the frame. Consult the vehicle's repair manual or manufacturer's documentation for accurate information.

Door Hinges

Components that attach the doors to the vehicle's body.

1

Door Hinge Bolts

M10 x 1.5
Torque Value
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Attach the doors to the vehicle's body. Consult the vehicle's repair manual or manufacturer's documentation for accurate information.

Hood Hinges

Components that attach the hood to the vehicle's body.

1

Hood Hinge Bolts

M10 x 1.5
Torque Value
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Attach the hood to the vehicle's body. Consult the vehicle's repair manual or manufacturer's documentation for accurate information.

Trunk Lid Hinges

Components that attach the trunk lid to the vehicle's body.

1

Trunk Lid Hinge Bolts

M10 x 1.5
Torque Value
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Attach the trunk lid to the vehicle's body. Consult the vehicle's repair manual or manufacturer's documentation for accurate information.

Bumper Mounts

Components that secure the bumper to the vehicle's body.

1

Bumper Mounting Bolts

M12 x 1.5
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Secure the bumper to the vehicle's body. Consult the vehicle's repair manual or manufacturer's documentation for accurate information.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the torque specification for the body bolts on a 2007-2016 Jeep Compass?

The torque specification for the body bolts on a 2007-2016 Jeep Compass is typically 50-60 ft-lbs (68-81 Nm). However, always refer to the vehicle's service manual for exact specifications, as variations may exist depending on the specific model year and trim.

Q2

Can I reuse body bolts after removal?

It is generally not recommended to reuse body bolts, as they are often torque-to-yield (TTY) bolts designed for one-time use. Reusing them can compromise the structural integrity of the vehicle. Always replace body bolts with new ones during reassembly.

Q3

What happens if I over-torque the body bolts?

Over-torquing body bolts can lead to thread stripping, bolt failure, or damage to the vehicle's frame. This can compromise the structural integrity of the vehicle and lead to safety issues. Always use a calibrated torque wrench and follow the manufacturer's specifications.

Q4

How often should I check the torque on body bolts?

Body bolts do not typically require regular torque checks unless you notice unusual noises, vibrations, or after an accident or major repair. However, if you frequently drive on rough terrain or off-road, periodic inspections are advisable.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A precision tool used to apply a specific torque to a fastener such as a bolt or nut.

  • Adjustable torque settings
  • Durable construction for repeated use
Learn more

Socket Set

A set of sockets that fit various bolt sizes, essential for torque application.

  • Includes multiple socket sizes
  • Compatible with torque wrench
Learn more

Thread Locker

A chemical compound used to secure bolts and prevent them from loosening over time.

  • Prevents vibration-induced loosening
  • Available in different strengths
Learn more
Service Procedures

Body Bolt Torque Specification Application

Detailed steps to properly torque body bolts on a 2007-2016 Jeep Compass.

  • Ensure the vehicle is on a flat surface and the parking brake is engaged.
  • Locate the body bolts that require torque application.
  • Clean the bolt threads and apply thread locker if specified.
  • Using the torque wrench and appropriate socket, tighten the bolts to the specified torque value (refer to the vehicle's service manual for exact values).
  • Double-check each bolt to ensure proper torque has been applied.
View full procedure
Technical Service Bulletins

Body Bolt Loosening Issue

2012-05-15

Some 2007-2012 Jeep Compass models may experience body bolts loosening over time due to vibration.

2007-2012 Jeep Compass

Resolution: Inspect and retorque all body bolts to the manufacturer's specifications. Apply thread locker to prevent future loosening.

Body Bolt Corrosion Recall

2014-08-22

Certain 2007-2014 Jeep Compass vehicles may have body bolts prone to corrosion, leading to potential structural issues.

2007-2014 Jeep Compass

Resolution: Replace corroded body bolts with new, corrosion-resistant bolts and apply anti-corrosion coating to prevent future issues.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Jeep Specs. All rights reserved.

Privacy Policy Terms of Service