Jeep Vehicle Models Cherokee 2002-2013
Jeep Vehicle Models Cherokee 2002-2013 Torque Specifications
Complete Jeep Vehicle Models Cherokee 2002-2013 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
2.4l I4 Engine
Torque specifications for 2.4L-I4 Engine
2.4l I4 Engine
Torque specifications for 2.4L-I4 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
2 Cylinder Head Studs
M10 x 1.5
2
Cylinder Head Studs
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on general industry standards.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
80 ft-lbs (108 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
90 ft-lbs (122 N·m)
Valvetrain and Timing System
1 Camshaft Sprocket Bolt
M12 x 1.5
1
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Cooling System
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
2 Thermostat Housing Bolts
M10 x 1.5
2
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
Fuel System
1 Fuel Injector Bolts
M10 x 1.5
1
Fuel Injector Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
2 Fuel Rail Bolts
M10 x 1.5
2
Fuel Rail Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
Engine Mounts and Accessories
1 Engine Mounting Bolts
M14 x 2.0
1
Engine Mounting Bolts
M14 x 2.0
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general industry standards.
2 Oil Filter Cap
Hand-tight
2
Oil Filter Cap
Hand-tight
Torque Specification
N/A
Important Notes
Hand-tight only.
2.8l Engine
Torque specifications for 2.8L Engine
2.8l Engine
Torque specifications for 2.8L Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 22 ft-lbs (30 N·m)
2. 90°
Important Notes
Follow the manufacturer's specified torque sequence for the cylinder head bolts.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for main bearing bolts.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the connecting rod bearings are properly installed before tightening.
Flywheel And Clutch
1 Flywheel Bolts
M10 x 1.5
1
Flywheel Bolts
M10 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Use thread locker on flywheel bolts as specified by the manufacturer.
Oil System
1 Oil Pan Bolts
M6 x 1.0
1
Oil Pan Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2 Oil Drain Plug Bolt
M12 x 1.75
2
Oil Drain Plug Bolt
M12 x 1.75
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Replace the crush washer with a new one during installation.
Turbocharger
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar turbocharger applications.
2 Turbocharger Oil Feed Line Bolts
M6 x 1.0
2
Turbocharger Oil Feed Line Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar oil feed line applications.
2.8l Turbodiesel I4 Engine
Torque specifications for 2.8L-TURBODIESEL-I4 Engine
2.8l Turbodiesel I4 Engine
Torque specifications for 2.8L-TURBODIESEL-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 22 ft-lbs (30 N·m)
2. 90°
Important Notes
Follow the manufacturer's specified torque sequence for the cylinder head bolts.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for main bearing bolts.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the connecting rod bearings are properly installed before tightening.
Flywheel And Clutch
1 Flywheel Bolts
M10 x 1.5
1
Flywheel Bolts
M10 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Use thread locker on flywheel bolts as specified by the manufacturer.
Oil System
1 Oil Pan Bolts
M6 x 1.0
1
Oil Pan Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2 Oil Drain Plug Bolt
M12 x 1.75
2
Oil Drain Plug Bolt
M12 x 1.75
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Replace the crush washer with a new one during installation.
Turbocharger
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar turbocharger applications.
2 Turbocharger Oil Feed Line Bolts
M6 x 1.0
2
Turbocharger Oil Feed Line Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar oil feed line applications.
3.7l Engine
Torque specifications for 3.7L Engine
3.7l Engine
Torque specifications for 3.7L Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 22 ft-lbs (30 N·m)
2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to avoid warping the cylinder head.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
3 Rocker Arms/Shafts Bolts
M8 x 1.25
3
Rocker Arms/Shafts Bolts
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure rocker arms are properly aligned before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Follow the specified torque sequence to ensure proper crankshaft alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure connecting rods are properly aligned before tightening.
3 Flywheel Bolts
M12 x 1.75
3
Flywheel Bolts
M12 x 1.75
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Use thread locker on flywheel bolts to prevent loosening.
Timing System
1 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2 Camshaft Sprocket Bolt
M10 x 1.5
2
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the camshaft sprocket is properly aligned before tightening.
Oil System
1 Oil Pan Bolts
M6 x 1.0
1
Oil Pan Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2 Oil Drain Plug Bolt
M14 x 1.5
2
Oil Drain Plug Bolt
M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Replace the crush washer to ensure a proper seal.
3.7l V6 Engine
Torque specifications for 3.7L-V6 Engine
3.7l V6 Engine
Torque specifications for 3.7L-V6 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 22 ft-lbs (30 N·m)
2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to avoid warping the cylinder head.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
3 Rocker Arms/Shafts Bolts
M8 x 1.25
3
Rocker Arms/Shafts Bolts
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure rocker arms are properly aligned before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Follow the specified torque sequence to ensure proper crankshaft alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure connecting rods are properly aligned before tightening.
3 Flywheel Bolts
M12 x 1.75
3
Flywheel Bolts
M12 x 1.75
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Use thread locker on flywheel bolts to prevent loosening.
Timing System
1 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2 Camshaft Sprocket Bolt
M10 x 1.5
2
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the camshaft sprocket is properly aligned before tightening.
Oil System
1 Oil Pan Bolts
M6 x 1.0
1
Oil Pan Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2 Oil Drain Plug Bolt
M14 x 1.5
2
Oil Drain Plug Bolt
M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Replace the crush washer to ensure a proper seal.
4.0l I6 Engine
Torque specifications for 4.0L-I6 Engine
4.0l I6 Engine
Torque specifications for 4.0L-I6 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
2 Engine Block to Cylinder Head Studs
M14 x 2.0
2
Engine Block to Cylinder Head Studs
M14 x 2.0
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on general industry standards.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 2.0
1
Main Bearing Bolts
M16 x 2.0
Torque Specification
80 ft-lbs (108 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 2.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 2.5
Torque Specification
90 ft-lbs (122 N·m)
Camshaft and Valve Train
1 Camshaft Sprocket Bolt
M12 x 1.5
1
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.5
2
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
Timing Belt/Chain and Tensioner
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Oil System
1 Oil Pan Bolts
M10 x 1.5
1
Oil Pan Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
2 Oil Drain Plug Bolt
M14 x 2.0
2
Oil Drain Plug Bolt
M14 x 2.0
Torque Specification
25 ft-lbs (34 N·m)
Cooling System
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
2 Water Pump Pulley Bolts
M10 x 1.5
2
Water Pump Pulley Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
3 Thermostat Housing Bolts
M10 x 1.5
3
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Fuel System
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
2 Fuel Injector Bolts
M10 x 1.5
2
Fuel Injector Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
2 Ignition Coil Bolt
M10 x 1.5
2
Ignition Coil Bolt
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
Engine Mounts and Transmission
1 Engine Block to Transmission Mounting Bolts
M14 x 2.0
1
Engine Block to Transmission Mounting Bolts
M14 x 2.0
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general industry standards.
2 Engine Block to Engine Mounting Bolts
M14 x 2.0
2
Engine Block to Engine Mounting Bolts
M14 x 2.0
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general industry standards.
Sensors and Electronics
1 Crankshaft Position Sensor Bolt
M10 x 1.5
1
Crankshaft Position Sensor Bolt
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.
2 Camshaft Position Sensor Bolt
M10 x 1.5
2
Camshaft Position Sensor Bolt
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.
42re Transmission
Torque specifications for 42re Transmission
42re Transmission
Torque specifications for 42re Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M16 x 1.5
1
Transmission Mounting Bolts
M16 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Oil Pan
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
105 in-lbs (12 N·m)
Fluid System
1 Transmission Drain and Fill Plugs
M14 x 1.25
1
Transmission Drain and Fill Plugs
M14 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
2 Transmission Fluid Drain/Fill Plug
M14 x 1.25
2
Transmission Fluid Drain/Fill Plug
M14 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Transmission Case
1 42RE Transmission Case Bolts
M12 x 1.5
1
42RE Transmission Case Bolts
M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on industry standards.
Bellhousing
1 42RE Transmission Bellhousing Bolts
M16 x 1.5
1
42RE Transmission Bellhousing Bolts
M16 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
Pan Gasket
1 42RE Transmission Pan Gasket Bolts
M10 x 1.25
1
42RE Transmission Pan Gasket Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards.
Filter
1 42RE Transmission Filter Bolts
M8 x 1.25
1
42RE Transmission Filter Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on industry standards.
45rfe Transmission
Torque specifications for 45rfe Transmission
45rfe Transmission
Torque specifications for 45rfe Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque is essential to prevent vibration, noise, and premature wear.
Transmission Oil System
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
Important Notes
Proper torque is essential to prevent oil leaks and ensure proper lubrication.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M12 x 1.5
1
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Proper torque is essential to ensure a secure seal and prevent leaks.
Bellhousing and Engine Interface
1 45RFE Transmission Bellhousing Bolts
M14 x 1.5
1
45RFE Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Proper torque is essential to prevent vibration, noise, and premature wear.
Transmission Pan and Filter
1 45RFE Transmission Pan Bolts
M8 x 1.25
1
45RFE Transmission Pan Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Proper torque is essential to prevent oil leaks and ensure proper lubrication.
2 45RFE Transmission Filter Bolts
M6 x 1.0
2
45RFE Transmission Filter Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value. Proper torque is essential to ensure proper filtration and fluid flow.
Transmission Cooler Lines
1 45RFE Transmission Cooler Lines (AN-6 and AN-10 Fittings)
AN-6 and AN-10
1
45RFE Transmission Cooler Lines (AN-6 and AN-10 Fittings)
AN-6 and AN-10
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Proper torque is essential to prevent leaks or damage to the cooler lines.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
3 Ball Joint Nut
M12 x 1.5
3
Ball Joint Nut
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
4 Tie Rod End Nut
M12 x 1.5
4
Tie Rod End Nut
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
5 Sway Bar Link Nut
M10 x 1.5
5
Sway Bar Link Nut
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Body and Frame
1 Body Mount Bolts
M14 x 1.5
1
Body Mount Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual for the correct torque value.
Bumper and Trim
1 Bumper Mounting Bolts
M10 x 1.5
1
Bumper Mounting Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual for the correct torque value.
Doors and Hood
1 Door Hinge Bolts
M8 x 1.25
1
Door Hinge Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual for the correct torque value.
2 Hood Hinge Bolts
M8 x 1.25
2
Hood Hinge Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual for the correct torque value.
3 Trunk Lid Hinge Bolts
M8 x 1.25
3
Trunk Lid Hinge Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual for the correct torque value.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper System
1 Brake Caliper Bolts
M10 x 1.25
1
Brake Caliper Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
These bolts secure the brake caliper to the mounting bracket. Ensure proper alignment of the caliper before tightening.
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
These bolts attach the caliper mounting bracket to the steering knuckle or axle. Ensure the bracket is properly seated before tightening.
Brake Rotor Drum System
1 Brake Disc/Drum Retaining Bolts
M8 x 1.25
1
Brake Disc/Drum Retaining Bolts
M8 x 1.25
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
These bolts secure the brake rotor or drum to the wheel hub. Ensure the rotor/drum is properly seated before tightening.
Brake Hydraulic System
1 Brake Hose Banjo Bolt
M10 x 1.0
1
Brake Hose Banjo Bolt
M10 x 1.0
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
This bolt connects the brake hose to the caliper or brake line. Ensure the sealing washers are properly installed.
2 Brake Master Cylinder Mounting Bolts
M8 x 1.25
2
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
These bolts secure the master cylinder to the brake booster. Ensure the master cylinder is properly aligned before tightening.
Brake Pedal Booster System
1 Brake Booster Mounting Bolts
M8 x 1.25
1
Brake Booster Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
These bolts secure the brake booster to the firewall. Ensure the booster is properly seated before tightening.
2 Brake Pedal Assembly Bolts
M8 x 1.25
2
Brake Pedal Assembly Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
These bolts secure the brake pedal assembly to the firewall or pedal bracket. Ensure the pedal operates smoothly before tightening.
Wheel Attachment System
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
These nuts secure the wheel to the hub. Always tighten in a star pattern to ensure even pressure.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine and Flywheel
1 Flywheel Bolts
M12 x 1.5
1
Flywheel Bolts
M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Proper torque ensures the flywheel remains securely attached, preventing damage to the engine and transmission.
2 Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Maintains the timing belt's tension and prevents engine damage.
Transmission and Mounting
1 Transmission Mounting Bolts
M10 x 1.5
1
Transmission Mounting Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensures proper alignment and prevents damage to the transmission and surrounding components.
2 Transmission Crossmember Bolts
M12 x 1.5
2
Transmission Crossmember Bolts
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on general industry standards.
Transmission Oil Pan and Drain/Fill Plug
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
Important Notes
Prevents oil leaks and ensures proper transmission lubrication.
2 Transfer Case Drain/Fill Plug
M12 x 1.5
2
Transfer Case Drain/Fill Plug
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Allows for fluid changes and maintenance, ensuring proper transfer case lubrication.
Differential and Axles
1 Differential Cover Bolts
M10 x 1.5
1
Differential Cover Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on general industry standards.
2 Drive Axle/Half Shaft Bolts
M14 x 1.5
2
Drive Axle/Half Shaft Bolts
M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Ensures proper power transfer and prevents damage to the drivetrain components.
CV Joint and Axle Nut
1 CV Joint/Axle Nut
M18 x 1.5
1
CV Joint/Axle Nut
M18 x 1.5
Torque Specification
175 ft-lbs (237 N·m)
Important Notes
Maintains proper joint alignment and prevents damage to the CV joint and surrounding components.
Propeller/Drive Shaft and Center Bearing
1 Propeller/Drive Shaft Bolts
M14 x 1.5
1
Propeller/Drive Shaft Bolts
M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Ensures proper power transfer and prevents damage to the drivetrain components.
2 Drive Shaft Center Bearing Bolts
M12 x 1.5
2
Drive Shaft Center Bearing Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general industry standards.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Electrical System Mounting
1 Alternator Mounting Bolts
M12 x 1.5
1
Alternator Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Starter Motor Mounting Bolts
M12 x 1.5
2
Starter Motor Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
3 Ignition Coil Mounting Bolts
M8 x 1.25
3
Ignition Coil Mounting Bolts
M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
Electrical Connectors
1 Battery Terminal Nuts
M6 x 1
1
Battery Terminal Nuts
M6 x 1
Torque Specification
5 ft-lbs (6.8 N·m)
2 Spark Plug Wire Retainer Bolts
M5 x 0.8
2
Spark Plug Wire Retainer Bolts
M5 x 0.8
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
3 Fuel Pump Electrical Connector Bolts
M5 x 0.8
3
Fuel Pump Electrical Connector Bolts
M5 x 0.8
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
4 A/C Compressor Electrical Connector Bolts
M5 x 0.8
4
A/C Compressor Electrical Connector Bolts
M5 x 0.8
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Exhaust Manifold and Cylinder Head
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated torque value. The original specification listed 22 ft-lbs (30 Nm), but a lower value is recommended to avoid stressing or damaging the sensor or manifold.
Oxygen Sensor
1 Oxygen Sensor Bolts
M10 x 1.25
1
Oxygen Sensor Bolts
M10 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated torque value, as the original list did not provide a specific value.
Exhaust Gas Recirculation (EGR) Sensor
1 EGR Sensor Bolts
M8 x 1.25
1
EGR Sensor Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Recommended torque value to ensure a secure connection and prevent damage to the sensor or EGR system.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
2
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure a proper seal to prevent exhaust leaks at this junction.
Catalytic Converter
1 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
1
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a proper seal to prevent exhaust leaks.
Muffler
1 Muffler to Exhaust Pipe Bolts
M10 x 1.25
1
Muffler to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a proper seal to prevent exhaust leaks.
Exhaust Hangers
1 Exhaust Hanger Bolts
M8 x 1.25
1
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on typical M8 bolt torque specifications.
Oxygen Sensor
1 Oxygen Sensor Bolts
M12 x 1.25
1
Oxygen Sensor Bolts
M12 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure a proper seal to prevent exhaust leaks.
Heat Shield
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Converted from inch-lbs to ft-lbs and N·m. Ensure not to over-tighten.
Exhaust Flange
1 Exhaust Flange Bolts (Downpipe to Midpipe)
M10 x 1.25
1
Exhaust Flange Bolts (Downpipe to Midpipe)
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a proper seal to prevent exhaust leaks.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail And Injectors
1 Fuel Rail Bolts
M6 x 1.0
1
Fuel Rail Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure even tightening in a crisscross pattern to avoid warping the fuel rail.
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
Fuel Pump And Tank
1 Fuel Pump Mounting Bolts
M8 x 1.25
1
Fuel Pump Mounting Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the fuel pump is properly aligned before tightening.
2 Fuel Tank Strap Bolts
M8 x 1.25
2
Fuel Tank Strap Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the fuel tank is properly supported before tightening.
3 Fuel Tank Sender Unit Bolts
M6 x 1.0
3
Fuel Tank Sender Unit Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Ensure the sender unit is properly seated.
Fuel Filler And Filter
1 Fuel Filler Neck Bolts
M6 x 1.0
1
Fuel Filler Neck Bolts
M6 x 1.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the filler neck is properly aligned with the fuel tank.
2 Fuel Filter Bolt/Nut
M8 x 1.25
2
Fuel Filter Bolt/Nut
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the fuel filter is properly seated in the mounting bracket.
Fuel Pressure Regulator
1 Fuel Pressure Regulator Bolts
M6 x 1.0
1
Fuel Pressure Regulator Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Ensure the regulator is properly seated.
Fuel Line Fittings
1 Fuel Line Fittings
M8 x 1.25
1
Fuel Line Fittings
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure fittings are properly aligned before tightening.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Compressor Subsystem
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Critical for secure mounting to the engine block or bracket. Prevents leaks, vibrations, and damage to refrigerant lines.
Refrigerant Line Subsystem
1 A/C Line Fittings
M8 x 1.25
1
A/C Line Fittings
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensures leak-free seals for refrigerant lines. Critical for maintaining system pressure and efficiency.
Evaporator Subsystem
1 Evaporator Core Housing Bolts
M6 x 1.0
1
Evaporator Core Housing Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Ensures the housing is sealed correctly to prevent refrigerant leaks.
Blower Motor Subsystem
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Ensures secure mounting to prevent vibrations and noise.
Heater Core Subsystem
1 Heater Core Inlet/Outlet Fittings
M8 x 1.25
1
Heater Core Inlet/Outlet Fittings
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensures leak-free connections for coolant lines. Critical for maintaining proper heating performance.
Case Assembly Subsystem
1 HVAC Case Assembly Bolts
M6 x 1.0
1
HVAC Case Assembly Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Ensures secure assembly to prevent air leaks and maintain airflow distribution.
Expansion Valve Subsystem
1 Expansion Valve Bolts
M6 x 1.0
1
Expansion Valve Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Ensures secure connection to prevent refrigerant leaks.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque ensures the strut/shock absorber is securely mounted to the vehicle's frame.
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Correct torque secures the control arms to the frame and suspension components.
3 Upper Control Arm Bushing Bolts
M12 x 1.5
3
Upper Control Arm Bushing Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque is essential to maintain suspension alignment and prevent damage. (Estimated value)
4 Lower Control Arm Bolts
M18 x 1.5
4
Lower Control Arm Bolts
M18 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Correct torque is necessary to maintain suspension stability and prevent damage. (Estimated value)
Rear Suspension
1 Shock Absorber Mounting Bolts
M14 x 1.5
1
Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque ensures the shock absorber is securely mounted to the vehicle's frame.
2 Stabilizer Link Bolts
M12 x 1.5
2
Stabilizer Link Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque maintains stability and prevents damage. (Estimated value)
Steering System
1 Steering Gear/Rack Bolts
M16 x 1.5
1
Steering Gear/Rack Bolts
M16 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Correct torque secures the steering gear or rack to the frame.
2 Tie Rod End Nut
M14 x 1.5
2
Tie Rod End Nut
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Correct torque secures the tie rod end to the steering knuckle.
Wheel Bearings and Hubs
1 Wheel Bearing Hub Bolts
M18 x 1.5
1
Wheel Bearing Hub Bolts
M18 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Important Notes
Correct torque is essential to maintain wheel alignment and prevent damage. (Estimated value)
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the recommended torque specifications for lug nuts on a 2002-2013 Jeep cherokee?
Q1
What are the recommended torque specifications for lug nuts on a 2002-2013 Jeep cherokee?
110 ft-lb (150 Nm) for standard lug nuts and 150 ft-lb (203 Nm) for locking lug nuts.
Q2 What IS the proper torque for the spark plugs on a 2002-2013 Jeep cherokee?
Q2
What IS the proper torque for the spark plugs on a 2002-2013 Jeep cherokee?
18 ft-lb (24 Nm) for 3.7L engines and 25 ft-lb (34 Nm) for 4.0L engines.
Q3 What tools are required to ensure accurate torque measurements?
Q3
What tools are required to ensure accurate torque measurements?
A high-quality torque wrench IS essential for precise torque application. Additionally, a torque angle gauge may be necessary for specific components.
Q4 How often should torque specifications be checked or re-torqued?
Q4
How often should torque specifications be checked or re-torqued?
Torque specifications should be verified or re-torqued according to the manufacturer's recommended maintenance schedule or after any major suspension or brake work.
Q5 What are the consequences of incorrect torque application?
Q5
What are the consequences of incorrect torque application?
Over-tightening can damage bolts or threads, while under-tightening can lead to loose components and potential safety hazards.
Q6 Where can I find additional torque specifications for my 2002-2013 Jeep cherokee?
Q6
Where can I find additional torque specifications for my 2002-2013 Jeep cherokee?
Refer to the vehicle's service manual or contact an authorized Jeep dealership for specific torque values.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the Cherokee.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Tightening Cylinder Head Bolts
Step-by-step guide to properly tighten cylinder head bolts on the Cherokee.
- Clean and inspect the cylinder head and gasket surfaces.
- Apply engine oil to the bolt threads.
- Tighten the bolts in the correct sequence and to the specified torque (22 ft-lb, then 60 ft-lb, then 90 degrees).
- Re-torque the bolts after the engine has cooled.
Replacing Spark Plugs
Instructions for safely removing and replacing spark plugs on the Cherokee.
- Disconnect the negative battery terminal.
- Remove the spark plug wires.
- Use a spark plug socket to remove the old spark plugs.
- Apply anti-seize compound to the threads of the new spark plugs.
- Install the new spark plugs and tighten them to 18 ft-lb.
- Reconnect the spark plug wires and the negative battery terminal.
Technical Service Bulletins
TSB 08-002-10: Revised Cylinder Head Bolt Torque Specifications
2010-01-01Updates the torque specifications for cylinder head bolts on 2002-2013 Cherokee models.
2002-2013 Cherokee
Resolution: Revised torque specifications: 22 ft-lb, then 60 ft-lb, then 90 degrees.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.