Jeep Vehicle Models Cherokee 2014-present
Jeep Vehicle Models Cherokee 2014-present Torque Specifications
Complete Jeep Vehicle Models Cherokee 2014-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
2.0l Engine
Torque specifications for 2.0L Engine
2.0l Engine
Torque specifications for 2.0L Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.25
1
Cylinder Head Bolts
M10 x 1.25
Torque Specification
1. 23 ft-lbs (31 N·m)
2. 90°
Important Notes
Follow the manufacturer's torque sequence diagram. Final step involves a 90-degree angle tighten.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M10 x 1.25
1
Main Bearing Bolts
M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Follow the manufacturer's torque sequence diagram.
2 Connecting Rod Nuts
M8 x 1.0
2
Connecting Rod Nuts
M8 x 1.0
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper alignment of the connecting rod cap.
Timing System
1 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2 Camshaft Sprocket Bolt
M10 x 1.25
2
Camshaft Sprocket Bolt
M10 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the turbocharger is properly aligned before tightening.
2 Turbocharger Oil Feed Line Bolt
M6 x 1.0
2
Turbocharger Oil Feed Line Bolt
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the oil feed line is properly seated before tightening.
2.0l Turbo I4 Engine
Torque specifications for 2.0L-TURBO-I4 Engine
2.0l Turbo I4 Engine
Torque specifications for 2.0L-TURBO-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.25
1
Cylinder Head Bolts
M10 x 1.25
Torque Specification
1. 23 ft-lbs (31 N·m)
2. 90°
Important Notes
Follow the manufacturer's torque sequence diagram. Final step involves a 90-degree angle tighten.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M10 x 1.25
1
Main Bearing Bolts
M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Follow the manufacturer's torque sequence diagram.
2 Connecting Rod Nuts
M8 x 1.0
2
Connecting Rod Nuts
M8 x 1.0
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper alignment of the connecting rod cap.
Timing System
1 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2 Camshaft Sprocket Bolt
M10 x 1.25
2
Camshaft Sprocket Bolt
M10 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the turbocharger is properly aligned before tightening.
2 Turbocharger Oil Feed Line Bolt
M6 x 1.0
2
Turbocharger Oil Feed Line Bolt
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the oil feed line is properly seated before tightening.
2.4l I4 Engine
Torque specifications for 2.4L-I4 Engine
2.4l I4 Engine
Torque specifications for 2.4L-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.25
1
Cylinder Head Bolts
M10 x 1.25
Torque Specification
1. 23 ft-lbs (31 N·m)
2. 90°
Important Notes
Follow the manufacturer's torque sequence diagram. Final step involves a 90-degree angle turn.
2 Rocker Arms/Shafts Bolts
M8 x 1.25
2
Rocker Arms/Shafts Bolts
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure rocker arms are properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M10 x 1.25
1
Main Bearing Bolts
M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Follow the manufacturer's torque sequence diagram.
2 Connecting Rod Nuts
M8 x 1.0
2
Connecting Rod Nuts
M8 x 1.0
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure connecting rods are properly seated on the crankshaft journals.
Timing System
1 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2 Camshaft Sprocket Bolt
M10 x 1.25
2
Camshaft Sprocket Bolt
M10 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the camshaft sprocket is properly aligned with the timing marks.
Intake And Exhaust
1 Intake Manifold Bolts
M6 x 1.0
1
Intake Manifold Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence diagram.
2 Exhaust Manifold Bolts
M8 x 1.25
2
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Follow the manufacturer's torque sequence diagram.
Cooling System
1 Water Pump Bolts
M8 x 1.25
1
Water Pump Bolts
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Follow the manufacturer's torque sequence diagram.
2 Thermostat Housing Bolts
M6 x 1.0
2
Thermostat Housing Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the thermostat is properly seated before tightening.
3.2l Engine
Torque specifications for 3.2L Engine
3.2l Engine
Torque specifications for 3.2L Engine
Cylinder Head and Valve Train
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value, as original spec was in inch-lbs.
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
Engine Block and Bearings
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
37 ft-lbs (50 N·m)
2 Engine Block to Transmission Bellhousing Bolts
M12 x 1.75
2
Engine Block to Transmission Bellhousing Bolts
M12 x 1.75
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value, based on general industry standards.
Crankshaft and Connecting Rods
1 Connecting Rod Nuts
M12 x 1.5
1
Connecting Rod Nuts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
85 ft-lbs (115 N·m)
Timing and Accessory Components
1 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
2 Camshaft Sprocket Bolt
M12 x 1.75
2
Camshaft Sprocket Bolt
M12 x 1.75
Torque Specification
30 ft-lbs (40 N·m)
Intake and Exhaust Components
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value, as original spec was in inch-lbs.
2 Exhaust Manifold/Headers Bolts
M12 x 1.75
2
Exhaust Manifold/Headers Bolts
M12 x 1.75
Torque Specification
23 ft-lbs (31 N·m)
Accessory Components
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
2 Thermostat Housing Bolts
M8 x 1.25
2
Thermostat Housing Bolts
M8 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value, as original spec was in inch-lbs.
Engine Mounts and Oil Pan
1 Engine Mounting Bolts
M12 x 1.75
1
Engine Mounting Bolts
M12 x 1.75
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value, based on general industry standards.
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value, as original spec was in inch-lbs.
3.2l V6 Engine
Torque specifications for 3.2L-V6 Engine
3.2l V6 Engine
Torque specifications for 3.2L-V6 Engine
Cylinder Head and Valve Train
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value, as original spec was in inch-lbs.
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
Engine Block and Bearings
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
37 ft-lbs (50 N·m)
2 Engine Block to Transmission Bellhousing Bolts
M12 x 1.75
2
Engine Block to Transmission Bellhousing Bolts
M12 x 1.75
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value, based on general industry standards.
Crankshaft and Connecting Rods
1 Connecting Rod Nuts
M12 x 1.5
1
Connecting Rod Nuts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
85 ft-lbs (115 N·m)
Timing and Accessory Components
1 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
2 Camshaft Sprocket Bolt
M12 x 1.75
2
Camshaft Sprocket Bolt
M12 x 1.75
Torque Specification
30 ft-lbs (40 N·m)
Intake and Exhaust Components
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value, as original spec was in inch-lbs.
2 Exhaust Manifold/Headers Bolts
M12 x 1.75
2
Exhaust Manifold/Headers Bolts
M12 x 1.75
Torque Specification
23 ft-lbs (31 N·m)
Accessory Components
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
2 Thermostat Housing Bolts
M8 x 1.25
2
Thermostat Housing Bolts
M8 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value, as original spec was in inch-lbs.
Engine Mounts and Oil Pan
1 Engine Mounting Bolts
M12 x 1.75
1
Engine Mounting Bolts
M12 x 1.75
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value, based on general industry standards.
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value, as original spec was in inch-lbs.
948te Transmission
Torque specifications for 948te Transmission
948te Transmission
Torque specifications for 948te Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N�m)
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
7.5 ft-lbs (12 N�m)
Important Notes
Estimated bolt size and torque value based on similar components.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M12 x 1.5
1
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
20 ft-lbs (27 N�m)
2 Transmission Fluid Drain/Fill Plug
M12 x 1.5
2
Transmission Fluid Drain/Fill Plug
M12 x 1.5
Torque Specification
20 ft-lbs (27 N�m)
Transmission Case
1 Transmission Case Bolts
M14 x 1.5
1
Transmission Case Bolts
M14 x 1.5
Torque Specification
1. 60 ft-lbs (81 N�m)
2. 80 ft-lbs (108 N�m)
Important Notes
Estimated torque values based on general industry standards.
Valve Body
1 Valve Body Bolts
M10 x 1.25
1
Valve Body Bolts
M10 x 1.25
Torque Specification
1. 20 ft-lbs (27 N�m)
2. 25 ft-lbs (34 N�m)
Important Notes
Estimated torque values based on general industry standards.
Solenoid Pack
1 Solenoid Pack Bolts
M8 x 1.25
1
Solenoid Pack Bolts
M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N�m)
2. 15 ft-lbs (20 N�m)
Important Notes
Estimated torque values based on general industry standards.
Torque Converter
1 Torque Converter Bolts
M12 x 1.5
1
Torque Converter Bolts
M12 x 1.5
Torque Specification
1. 30 ft-lbs (40 N�m)
2. 40 ft-lbs (54 N�m)
Important Notes
Estimated torque values based on general industry standards.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension and Steering
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
3 Ball Joint Nut
M12 x 1.5
3
Ball Joint Nut
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
4 Tie Rod End Nut
M10 x 1.5
4
Tie Rod End Nut
M10 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
5 Sway Bar Link Nut
M12 x 1.5
5
Sway Bar Link Nut
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
6 Steering Gear/Rack Bolts
M14 x 1.5
6
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Body and Frame
1 Body Mount Bolts
M12 x 1.5
1
Body Mount Bolts
M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's documentation for accurate torque specifications.
2 Door Hinge Bolts
M10 x 1.5
2
Door Hinge Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's documentation for accurate torque specifications.
3 Hood Hinge Bolts
M10 x 1.5
3
Hood Hinge Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's documentation for accurate torque specifications.
4 Trunk Lid Hinge Bolts
M10 x 1.5
4
Trunk Lid Hinge Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's documentation for accurate torque specifications.
5 Bumper Mounting Bolts
M12 x 1.5
5
Bumper Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's documentation for accurate torque specifications.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper System
1 Brake Caliper Bolts
M10 x 1.25
1
Brake Caliper Bolts
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure caliper is properly aligned before tightening.
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Ensure bracket is seated properly before tightening.
Brake Rotor Drum System
1 Brake Disc/Drum Retaining Bolts
M12 x 1.25
1
Brake Disc/Drum Retaining Bolts
M12 x 1.25
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure rotor/drum is seated flush against the hub before tightening.
Brake Hydraulic System
1 Brake Hose Banjo Bolt
M10 x 1.0
1
Brake Hose Banjo Bolt
M10 x 1.0
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Use new sealing washers and ensure the banjo fitting is aligned properly.
2 Brake Master Cylinder Mounting Bolts
M8 x 1.25
2
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the master cylinder is properly seated before tightening.
3 Brake Booster Mounting Bolts
M10 x 1.25
3
Brake Booster Mounting Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the booster is properly aligned with the firewall.
Brake Pedal System
1 Brake Pedal Assembly Bolts
M8 x 1.25
1
Brake Pedal Assembly Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the pedal assembly is properly aligned before tightening.
Wheel Attachment System
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
100 ft-lbs (135 N·m)
Important Notes
Always use a torque wrench to avoid over-tightening or under-tightening.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine and Transmission
1 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
1
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value, consult manufacturer's specifications for exact value.
2 Transmission Crossmember Bolts
M12 x 1.25
2
Transmission Crossmember Bolts
M12 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value, consult manufacturer's specifications for exact value.
Transmission and Drive Axle
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Drive Axle/Half Shaft Bolts
M16 x 1.5
2
Drive Axle/Half Shaft Bolts
M16 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
CV Joint and Axle Shaft
1 CV Joint/Axle Nut
M20 x 1.5
1
CV Joint/Axle Nut
M20 x 1.5
Torque Specification
180 ft-lbs (244 N·m)
2 Drive Axle/Half Shaft Nut (inner)
M18 x 1.5
2
Drive Axle/Half Shaft Nut (inner)
M18 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Estimated value, consult manufacturer's specifications for exact value.
Differential and Transfer Case
1 Differential Cover Bolts
M12 x 1.25
1
Differential Cover Bolts
M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, consult manufacturer's specifications for exact value.
2 Transfer Case Mounting Bolts
M14 x 1.5
2
Transfer Case Mounting Bolts
M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value, consult manufacturer's specifications for exact value.
Fluid Reservoirs
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
105 in-lbs (12 N·m)
2 Differential Drain/Fill Plug
M12 x 1.25
2
Differential Drain/Fill Plug
M12 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
3 Transfer Case Drain/Fill Plug
M12 x 1.25
3
Transfer Case Drain/Fill Plug
M12 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Alternator
1 Alternator Mounting Bolts
M12 x 1.5
1
Alternator Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Proper torque ensures the alternator is securely attached to the engine block, preventing damage and ensuring reliable operation.
Starter Motor
1 Starter Motor Mounting Bolts
M14 x 1.5
1
Starter Motor Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque prevents damage to the starter motor and ensures reliable engine starting.
Battery
1 Battery Terminal Nuts
M8 x 1.25
1
Battery Terminal Nuts
M8 x 1.25
Torque Specification
70 in-lbs (8 N·m)
Important Notes
Proper torque ensures a secure connection, preventing electrical system malfunctions and damage to the battery.
Ignition System
1 Ignition Coil Mounting Bolts
M10 x 1.5
1
Ignition Coil Mounting Bolts
M10 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value based on general industry standards. Proper torque ensures the coil is securely attached to the engine, preventing damage and ensuring reliable operation.
Fuel System
1 Fuel Pump Electrical Connector Bolts
M6 x 1.0
1
Fuel Pump Electrical Connector Bolts
M6 x 1.0
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on general industry standards. Proper torque ensures a secure connection, preventing electrical system malfunctions and damage to the fuel pump.
Air Conditioning System
1 A/C Compressor Electrical Connector Bolts
M6 x 1.0
1
A/C Compressor Electrical Connector Bolts
M6 x 1.0
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on general industry standards. Proper torque ensures a secure connection, preventing electrical system malfunctions and damage to the compressor.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Oxygen Sensors
1 Oxygen Sensor Bolts
M10 x 1.5
1
Oxygen Sensor Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Consult vehicle's repair manual or manufacturer's instructions for specific torque values.
2 Heated Oxygen Sensor (HO2S) Bolts
M10 x 1.5
2
Heated Oxygen Sensor (HO2S) Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Consult vehicle's repair manual or manufacturer's instructions for specific torque values.
Egr Valve
1 EGR Valve Bolts
M12 x 1.75
1
EGR Valve Bolts
M12 x 1.75
Torque Specification
105 in-lbs (12 N·m)
Important Notes
Convert inch-lbs to ft-lbs: 105 in-lbs / 12 = 8.75 ft-lbs (estimated).
Nox Sensors
1 NOx Sensor Bolts
M10 x 1.5
1
NOx Sensor Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Consult vehicle's repair manual or manufacturer's instructions for specific torque values.
Fuel Injectors
1 Fuel Injector Bolts
M12 x 1.75
1
Fuel Injector Bolts
M12 x 1.75
Torque Specification
105 in-lbs (12 N·m)
Important Notes
Convert inch-lbs to ft-lbs: 105 in-lbs / 12 = 8.75 ft-lbs (estimated).
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
2
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure a secure connection to prevent leaks.
Catalytic Converter
1 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
1
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure a tight seal to prevent exhaust leaks.
Muffler
1 Muffler to Exhaust Pipe Bolts
M10 x 1.25
1
Muffler to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure a secure connection to prevent leaks and noise.
Exhaust Hangers
1 Exhaust Hanger Bolts
M8 x 1.25
1
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on typical M8 bolt torque specifications.
Oxygen Sensor
1 Oxygen Sensor (O2 Sensor) Bolts
M12 x 1.25
1
Oxygen Sensor (O2 Sensor) Bolts
M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on typical M12 bolt torque specifications.
Heat Shield
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on typical M6 bolt torque specifications.
Exhaust Flange
1 Exhaust Flange Bolts
M10 x 1.25
1
Exhaust Flange Bolts
M10 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure a tight seal to prevent exhaust leaks.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Delivery System
1 Fuel Rail Bolts
M6 x 1.0
1
Fuel Rail Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure proper torque to prevent fuel leaks and maintain fuel pressure.
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure proper torque to prevent fuel leaks and ensure efficient fuel delivery.
3 High-Pressure Fuel Line Fittings
M8 x 1.25
3
High-Pressure Fuel Line Fittings
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Critical to prevent fuel leaks and maintain high-pressure system integrity.
4 Fuel Pressure Regulator Bolts
M6 x 1.0
4
Fuel Pressure Regulator Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure proper torque to prevent leaks and maintain consistent fuel pressure.
Fuel Storage System
1 Fuel Pump Mounting Bolts
M8 x 1.25
1
Fuel Pump Mounting Bolts
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure proper torque to prevent leaks and maintain consistent fuel delivery.
2 Fuel Tank Strap Bolts
M10 x 1.5
2
Fuel Tank Strap Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper torque to prevent fuel tank movement or detachment.
3 Fuel Filler Neck Bolts
M8 x 1.25
3
Fuel Filler Neck Bolts
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure proper torque to prevent fuel vapor leaks and ensure proper refueling.
4 Fuel Tank Sender Unit Bolts
M8 x 1.25
4
Fuel Tank Sender Unit Bolts
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure proper torque to prevent fuel leaks and ensure accurate fuel level readings.
Fuel Filtration System
1 Fuel Filter Bolt/Nut
M8 x 1.25
1
Fuel Filter Bolt/Nut
M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure proper torque to prevent fuel leaks and ensure proper filtration.
Fuel Line Management
1 Fuel Line Clamp Bolts
M6 x 1.0
1
Fuel Line Clamp Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure proper torque to prevent fuel line movement, wear, or leaks.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Ac Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N-m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
2 A/C Line Fittings
M8 x 1.25
2
A/C Line Fittings
M8 x 1.25
Torque Specification
15 ft-lbs (20 N-m)
Important Notes
Ensure fittings are clean and free of debris before tightening.
Evaporator Core
1 Evaporator Core Housing Bolts
M6 x 1.0
1
Evaporator Core Housing Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Torque value is estimated based on similar HVAC housing bolts.
Blower Motor
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Torque value is estimated based on similar blower motor bolts.
Heater Core
1 Heater Core Inlet/Outlet Fittings
M8 x 1.25
1
Heater Core Inlet/Outlet Fittings
M8 x 1.25
Torque Specification
15 ft-lbs (20 N-m)
Important Notes
Ensure fittings are clean and free of debris before tightening.
Hvac Case
1 HVAC Case Assembly Bolts
M6 x 1.0
1
HVAC Case Assembly Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Torque value is estimated based on similar HVAC case bolts.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Secures the strut/shock absorber to the vehicle's frame.
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Secures the control arm to the vehicle's frame.
3 Steering Knuckle Bolts
M14 x 1.5
3
Steering Knuckle Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (135 N·m)
Important Notes
Secures the steering knuckle to the strut/shock absorber.
Rear Suspension
1 Coil Spring Isolator Bolts
M12 x 1.5
1
Coil Spring Isolator Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the coil spring isolator to the strut/shock absorber.
2 Stabilizer Bar Mounting Bolts
M14 x 1.5
2
Stabilizer Bar Mounting Bolts
M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Secures the stabilizer bar to the vehicle's frame.
Steering System
1 Tie Rod End Nut
M16 x 1.5
1
Tie Rod End Nut
M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Secures the tie rod end to the steering knuckle.
2 Ball Joint Nut
M14 x 1.5
2
Ball Joint Nut
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Secures the ball joint to the control arm.
Sway Bar System
1 Sway Bar Link Nut
M12 x 1.5
1
Sway Bar Link Nut
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the sway bar link to the sway bar.
Control Arm Bushings
1 Upper Control Arm Bushing Bolts
M12 x 1.5
1
Upper Control Arm Bushing Bolts
M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Secures the upper control arm bushings to the control arm.
2 Lower Control Arm Bushing Bolts
M12 x 1.5
2
Lower Control Arm Bushing Bolts
M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Secures the lower control arm bushings to the control arm.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the torque specifications for the lug nuts on a 2014-Present Jeep Cherokee?
Q1
What are the torque specifications for the lug nuts on a 2014-Present Jeep Cherokee?
Tighten the lug nuts to 140 ft-lbs (190 Nm).
Q2 What torque should I use to tighten the oil pan bolts on my 2017 Jeep Cherokee?
Q2
What torque should I use to tighten the oil pan bolts on my 2017 Jeep Cherokee?
Tighten the oil pan bolts to 10 ft-lbs (14 Nm).
Q3 What IS the recommended torque for the spark plugs on a 2014 Jeep Cherokee?
Q3
What IS the recommended torque for the spark plugs on a 2014 Jeep Cherokee?
Tighten the spark plugs to 25 ft-lbs (34 Nm).
Q4 Do I need to use a torque wrench when replacing the battery terminals on my 2016 Jeep Cherokee?
Q4
Do I need to use a torque wrench when replacing the battery terminals on my 2016 Jeep Cherokee?
Yes, it IS recommended to use a torque wrench to tighten the battery terminals to 11 ft-lbs (15 Nm).
Q5 How often should I torque the lug nuts on my 2015 Jeep Cherokee?
Q5
How often should I torque the lug nuts on my 2015 Jeep Cherokee?
It IS recommended to torque the lug nuts every 12 months or 12,000 miles (19,312 km).
Q6 What are the consequences of over-tightening bolts?
Q6
What are the consequences of over-tightening bolts?
Over-tightening bolts can lead to stripped threads, damaged components, and increased risk of failure.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the cherokee.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Bolt Tightening Procedure for 2014-Present Jeep Cherokee
This procedure outlines the steps for properly tightening bolts on the 2014-Present Jeep Cherokee to ensure optimal performance and safety.
- Clean all bolts and threads thoroughly before tightening.
- Apply a small amount of anti-seize lubricant to the threads of the bolt.
- Tighten the bolt to the specified torque value using a digital torque wrench.
- Follow the torque sequence provided in the repair manual to ensure even distribution of force.
- Double-check all torqued bolts to ensure they are at the correct tightness.
- Safety Considerations:
- Use proper safety equipment, including gloves and eye protection.
- Do not overtighten bolts, as this can damage the threads and components.
- Use caution when working around hot engine components or exhaust systems.
Technical Service Bulletins
Technical Service Bulletin: Revised Torque Specifications for 2014-2018 Jeep Cherokee Steering Components
2020-06-15This technical service bulletin provides updated torque specifications for various steering components on the 2014-2018 Jeep Cherokee.
2014-2018 Jeep Cherokee
Resolution: The following torque specifications should be used for the affected components:
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.