Jeep Vehicle Models Gladiator 2020-present
Jeep Vehicle Models Gladiator 2020-present Torque Specifications
Complete Jeep Vehicle Models Gladiator 2020-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
3.0l Engine
Torque specifications for 3.0L Engine
3.0l Engine
Torque specifications for 3.0L Engine
Cylinder Head and Valvetrain
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
100 inch-lbs (11 N·m)
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
Engine Block and Bearings
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
100 ft-lbs (136 N·m)
2 Connecting Rod Nuts
M12 x 1.5
2
Connecting Rod Nuts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Timing and Accessory Components
1 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Water Pump Bolts
M8 x 1.25
2
Water Pump Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Exhaust and Emissions Components
1 Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 EGR Valve Bolts
M8 x 1.25
2
EGR Valve Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Fuel System Components
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
100 inch-lbs (11 N·m)
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Turbocharger and Intercooler Components
1 Turbocharger Mounting Bolts
M12 x 1.5
1
Turbocharger Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
2 Intercooler Mounting Bolts
M10 x 1.5
2
Intercooler Mounting Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards.
3.0l Turbodiesel V6 Engine
Torque specifications for 3.0L-TURBODIESEL-V6 Engine
3.0l Turbodiesel V6 Engine
Torque specifications for 3.0L-TURBODIESEL-V6 Engine
Cylinder Head and Valvetrain
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
100 inch-lbs (11 N·m)
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
Engine Block and Bearings
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
100 ft-lbs (136 N·m)
2 Connecting Rod Nuts
M12 x 1.5
2
Connecting Rod Nuts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Timing and Accessory Components
1 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 Water Pump Bolts
M8 x 1.25
2
Water Pump Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Exhaust and Emissions Components
1 Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2 EGR Valve Bolts
M8 x 1.25
2
EGR Valve Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Fuel System Components
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
100 inch-lbs (11 N·m)
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Turbocharger and Intercooler Components
1 Turbocharger Mounting Bolts
M12 x 1.5
1
Turbocharger Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
2 Intercooler Mounting Bolts
M10 x 1.5
2
Intercooler Mounting Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards.
3.6l Engine
Torque specifications for 3.6L Engine
3.6l Engine
Torque specifications for 3.6L Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 23 ft-lbs (31 N·m)
2. 90°
Important Notes
Follow the manufacturer's torque sequence to ensure even clamping force.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8.3 ft-lbs (11 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure rod bearings are properly installed before tightening.
Timing System
1 Camshaft Sprocket Bolt
M10 x 1.5
1
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Ensure the timing marks are aligned before tightening.
2 Timing Chain Tensioner Bolt
M8 x 1.25
2
Timing Chain Tensioner Bolt
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the tensioner is properly seated before tightening.
Intake And Exhaust
1 Intake Manifold Bolts
M6 x 1.0
1
Intake Manifold Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure a proper seal.
2 Exhaust Manifold Bolts
M8 x 1.25
2
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.
Cooling System
1 Water Pump Bolts
M6 x 1.0
1
Water Pump Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the water pump gasket is properly seated before tightening.
2 Thermostat Housing Bolts
M6 x 1.0
2
Thermostat Housing Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the thermostat housing gasket is properly seated before tightening.
3.6l V6 Engine
Torque specifications for 3.6L-V6 Engine
3.6l V6 Engine
Torque specifications for 3.6L-V6 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 23 ft-lbs (31 N·m)
2. 90°
Important Notes
Follow the manufacturer's torque sequence to ensure even clamping force.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
8.3 ft-lbs (11 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M12 x 1.75
1
Main Bearing Bolts
M12 x 1.75
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper alignment.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure rod bearings are properly installed before tightening.
Timing System
1 Camshaft Sprocket Bolt
M10 x 1.5
1
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Ensure the timing marks are aligned before tightening.
2 Timing Chain Tensioner Bolt
M8 x 1.25
2
Timing Chain Tensioner Bolt
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the tensioner is properly seated before tightening.
Intake And Exhaust
1 Intake Manifold Bolts
M6 x 1.0
1
Intake Manifold Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure a proper seal.
2 Exhaust Manifold Bolts
M8 x 1.25
2
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.
Cooling System
1 Water Pump Bolts
M6 x 1.0
1
Water Pump Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the water pump gasket is properly seated before tightening.
2 Thermostat Housing Bolts
M6 x 1.0
2
Thermostat Housing Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the thermostat housing gasket is properly seated before tightening.
8hp Transmission
Torque specifications for 8hp Transmission
8hp Transmission
Torque specifications for 8hp Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated bolt size. Ensure proper alignment and tightening sequence to prevent damage to the transmission or surrounding components.
Transmission Case
1 Transmission Case Bolts (Upper and Lower)
M14 x 1.5
1
Transmission Case Bolts (Upper and Lower)
M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated bolt size. Ensure proper alignment and tightening sequence to prevent damage to the transmission's internal components.
Valve Body and Pump
1 Valve Body Bolts
M10 x 1.5
1
Valve Body Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated bolt size. Ensure proper alignment and tightening sequence to prevent damage to the valve body or pump.
2 Pump Bolts (Transmission Pump)
M12 x 1.5
2
Pump Bolts (Transmission Pump)
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated bolt size. Ensure proper alignment and tightening sequence to prevent damage to the pump or transmission case.
Torque Converter and Cooler Lines
1 Torque Converter Bolts
M14 x 1.5
1
Torque Converter Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated bolt size. Ensure proper alignment and tightening sequence to prevent damage to the torque converter or transmission case.
2 Transmission Cooler Line Fittings
M10 x 1.5
2
Transmission Cooler Line Fittings
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated bolt size. Ensure proper alignment and tightening sequence to prevent damage to the cooler lines or transmission case.
Oil Pan and Drain/Fill Plugs
1 Transmission Oil Pan Bolts
M10 x 1.5
1
Transmission Oil Pan Bolts
M10 x 1.5
Torque Specification
100 in-lbs (11 N·m)
Important Notes
Estimated bolt size. Ensure proper alignment and tightening sequence to prevent damage to the oil pan or transmission case.
2 Transmission Drain and Fill Plugs
M12 x 1.5
2
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated bolt size. Ensure proper alignment and tightening sequence to prevent damage to the drain/fill plugs or transmission case.
Body
Torque specifications for Body
Body
Torque specifications for Body
Doors
1 Door Hinge Bolts
M8 x 1.25
1
Door Hinge Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper alignment of doors during installation.
2 Mirror Mounting Bolts
M6 x 1.0
2
Mirror Mounting Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar components.
3 Fuel Door Hinge Bolts
M6 x 1.0
3
Fuel Door Hinge Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (13 N·m)
Important Notes
Estimated value based on similar components.
Seats
1 Seat Mounting Bolts
M10 x 1.5
1
Seat Mounting Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Critical for passenger safety.
2 Seat Belt Anchor Bolts
M10 x 1.5
2
Seat Belt Anchor Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure proper alignment of seat belt anchors.
Exterior Panels
1 Fender Bolts
M8 x 1.25
1
Fender Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper alignment of fenders during installation.
2 Bumper Mounting Bolts
M10 x 1.5
2
Bumper Mounting Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Critical for crash protection.
3 Grille Mounting Bolts
M8 x 1.25
3
Grille Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper alignment of the grille.
4 Roof Rack Bolts
M8 x 1.25
4
Roof Rack Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Critical for load-bearing purposes.
Interior Trim
1 Interior Trim Panel Screws
M5 x 0.8
1
Interior Trim Panel Screws
M5 x 0.8
Torque Specification
0.83 ft-lbs (1.1 N·m)
Important Notes
Use a torque screwdriver to avoid over-tightening.
2 Rearview Mirror Mounting Screws
M5 x 0.8
2
Rearview Mirror Mounting Screws
M5 x 0.8
Torque Specification
0.83 ft-lbs (1.1 N·m)
Important Notes
Use a torque screwdriver to avoid over-tightening.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper
1 Brake Caliper Bolts
M10 x 1.25
1
Brake Caliper Bolts
M10 x 1.25
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Ensure the caliper is properly aligned before tightening.
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Ensure the bracket is securely attached to the steering knuckle or axle.
Brake Rotor Drum
1 Brake Disc/Drum Retaining Bolts
M8 x 1.25
1
Brake Disc/Drum Retaining Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the rotor or drum is properly seated on the hub before tightening.
Brake Hydraulics
1 Brake Hose Banjo Bolt
M10 x 1.0
1
Brake Hose Banjo Bolt
M10 x 1.0
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the banjo fitting is properly aligned and the sealing washers are in place.
2 Brake Master Cylinder Mounting Bolts
M8 x 1.25
2
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the master cylinder is properly aligned with the brake booster or firewall.
3 Brake Booster Mounting Bolts
M8 x 1.25
3
Brake Booster Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the brake booster is properly aligned with the firewall.
Brake Pedal
1 Brake Pedal Assembly Bolts
M8 x 1.25
1
Brake Pedal Assembly Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the brake pedal operates smoothly after tightening.
Wheel Assembly
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Always use a torque wrench to ensure proper tightening. Over-tightening can warp the rotor.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine Block
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Secure the main bearings that support the crankshaft.
2 Crankshaft Bolt
M18 x 1.5
2
Crankshaft Bolt
M18 x 1.5
Torque Specification
1. 150 ft-lbs (203 N·m)
2. 200 ft-lbs (271 N·m)
Important Notes
Estimated torque value range. Secure the crankshaft to the engine block.
Cylinder Head and Valvetrain
1 Camshaft Bolt
M10 x 1.5
1
Camshaft Bolt
M10 x 1.5
Torque Specification
1. 30 ft-lbs (41 N·m)
2. 40 ft-lbs (54 N·m)
Important Notes
Estimated torque value range. Secure the camshaft to the engine block.
Transmission and Driveshaft
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secure the transmission to the engine block.
2 Transmission Pan Bolts
M8 x 1.25
2
Transmission Pan Bolts
M8 x 1.25
Torque Specification
1. 20 ft-lbs (27 N·m)
2. 30 ft-lbs (41 N·m)
Important Notes
Estimated torque value range. Secure the transmission pan to the transmission case.
3 Propeller/Drive Shaft Bolts
M14 x 1.5
3
Propeller/Drive Shaft Bolts
M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Secure the propeller shaft to the transmission.
Driveshaft and Axles
1 Drive Axle/Half Shaft Bolts
M12 x 1.5
1
Drive Axle/Half Shaft Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secure the drive axles/half shafts to the transmission.
2 Drive Axle/Half Shaft Nut
M16 x 1.5
2
Drive Axle/Half Shaft Nut
M16 x 1.5
Torque Specification
1. 100 ft-lbs (136 N·m)
2. 150 ft-lbs (203 N·m)
Important Notes
Estimated torque value range. Secure the drive axle/half shaft to the wheel hub.
3 CV Joint/Axle Nut
M18 x 1.5
3
CV Joint/Axle Nut
M18 x 1.5
Torque Specification
185 ft-lbs (251 N·m)
Important Notes
Secure the CV joint to the axle shaft.
Differential and Transfer Case
1 Differential Drain/Fill Plug
M10 x 1.5
1
Differential Drain/Fill Plug
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Secure the differential fluid reservoir.
2 Transfer Case Drain/Fill Plug
M10 x 1.5
2
Transfer Case Drain/Fill Plug
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Secure the transfer case fluid reservoir.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Battery System
1 Battery Terminal Nuts
M10 x 1.5
1
Battery Terminal Nuts
M10 x 1.5
Torque Specification
10 ft-lbs (13 N·m)
Important Notes
Secure the battery terminals to ensure a proper connection and prevent damage to the battery or electrical system.
Alternator System
1 Alternator Mounting Bolts
M12 x 1.75
1
Alternator Mounting Bolts
M12 x 1.75
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Secure the alternator in place to ensure proper belt alignment and prevent damage to the alternator or electrical system.
Starter Motor System
1 Starter Motor Mounting Bolts
M12 x 1.75
1
Starter Motor Mounting Bolts
M12 x 1.75
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Secure the starter motor in place to ensure proper engagement with the flywheel and prevent damage to the starter motor or electrical system.
Ignition System
1 Ignition Coil Mounting Bolts
M8 x 1.25
1
Ignition Coil Mounting Bolts
M8 x 1.25
Torque Specification
12.5 ft-lbs (16.9 N·m)
Important Notes
Estimated value. Secure the ignition coil in place to ensure proper spark delivery and prevent damage to the ignition coil or electrical system.
Accessory Systems
1 Fuel Pump Electrical Connector Bolts
M5 x 0.8
1
Fuel Pump Electrical Connector Bolts
M5 x 0.8
Torque Specification
7.5 ft-lbs (1 N·m)
Important Notes
Estimated value. Secure the fuel pump electrical connector to ensure a proper connection and prevent damage to the fuel pump or electrical system.
2 A/C Compressor Electrical Connector Bolts
M5 x 0.8
2
A/C Compressor Electrical Connector Bolts
M5 x 0.8
Torque Specification
7.5 ft-lbs (1 N·m)
Important Notes
Estimated value. Secure the A/C compressor electrical connector to ensure a proper connection and prevent damage to the A/C compressor or electrical system.
3 Power Steering Pump Electrical Connector Bolts
M5 x 0.8
3
Power Steering Pump Electrical Connector Bolts
M5 x 0.8
Torque Specification
7.5 ft-lbs (1 N·m)
Important Notes
Estimated value. Secure the power steering pump electrical connector to ensure a proper connection and prevent damage to the power steering pump or electrical system.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
EGR System
1 EGR Valve Bolts
M10 x 1.5
1
EGR Valve Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure proper torque to prevent leaks and ensure EGR valve function.
Oxygen Sensor System
1 Oxygen Sensor Bolts
M8 x 1.25
1
Oxygen Sensor Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value based on industry standards. Ensure proper torque to prevent damage and ensure oxygen sensor function.
Catalytic Converter System
1 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.75
1
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.75
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure proper torque to prevent leaks and ensure catalytic converter function.
NOx Sensor System
1 NOx Sensor Bolts
M8 x 1.25
1
NOx Sensor Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value based on industry standards. Ensure proper torque to prevent damage and ensure NOx sensor function.
Fuel Injector System
1 Fuel Injector Rail Bolts
M10 x 1.5
1
Fuel Injector Rail Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure proper torque to prevent leaks and ensure fuel injector function.
Exhaust Manifold System
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.75
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.75
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper torque to prevent leaks and ensure exhaust manifold/header function.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M8 x 1.25
2
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure a secure connection to prevent leaks at this critical junction.
Catalytic Converter
1 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
1
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure a secure connection to prevent leaks and maintain emissions control.
Muffler
1 Muffler to Exhaust Pipe Bolts
M8 x 1.25
1
Muffler to Exhaust Pipe Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure a secure connection to prevent leaks and maintain proper exhaust flow.
Exhaust Hangers
1 Exhaust Hanger Bolts
M6 x 1.0
1
Exhaust Hanger Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Oxygen Sensors
1 Oxygen Sensor Bolts
M8 x 1.25
1
Oxygen Sensor Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure a secure connection to prevent leaks and maintain accurate sensor readings.
Heat Shields
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Exhaust Flanges
1 Exhaust Flange Bolts
M10 x 1.5
1
Exhaust Flange Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure a secure connection to prevent leaks at flange junctions.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail and Injector System
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
8.8 ft-lbs (11 N·m)
Important Notes
Estimated bolt size, actual size may vary.
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
3 Fuel Injector Rail Bolts
M8 x 1.25
3
Fuel Injector Rail Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Fuel Pump and Tank System
1 Fuel Pump Mounting Bolts
M10 x 1.5
1
Fuel Pump Mounting Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2 Fuel Tank Strap Bolts
M12 x 1.75
2
Fuel Tank Strap Bolts
M12 x 1.75
Torque Specification
35 ft-lbs (47 N·m)
Fuel Filler and Vent System
1 Fuel Filler Neck Bolts
M10 x 1.5
1
Fuel Filler Neck Bolts
M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
2 Fuel Tank Vent Valve Bolts
M8 x 1.25
2
Fuel Tank Vent Valve Bolts
M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values, actual values may vary.
Fuel Filter and Pressure Regulator System
1 Fuel Filter Bolt/Nut
M12 x 1.75
1
Fuel Filter Bolt/Nut
M12 x 1.75
Torque Specification
22 ft-lbs (30 N·m)
2 Fuel Pressure Regulator Mounting Bolts
M8 x 1.25
2
Fuel Pressure Regulator Mounting Bolts
M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values, actual values may vary.
Fuel Line Fittings
1 Fuel Line Fittings
M10 x 1.5
1
Fuel Line Fittings
M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values, actual values may vary.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Ac Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N-m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load. Estimated bolt size based on typical A/C compressor applications.
2 A/C Line Fittings
M8 x 1.25
2
A/C Line Fittings
M8 x 1.25
Torque Specification
20 ft-lbs (27 N-m)
Important Notes
Ensure fittings are clean and free of debris before tightening. Estimated bolt size based on typical A/C line applications.
Evaporator Core
1 Evaporator Core Housing Bolts
M6 x 1.0
1
Evaporator Core Housing Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Ensure housing is properly sealed to prevent refrigerant leaks. Estimated bolt size based on typical evaporator housing applications.
Blower Motor
1 Blower Motor Mounting Bolts
M5 x 0.8
1
Blower Motor Mounting Bolts
M5 x 0.8
Torque Specification
6.67 ft-lbs (9 N-m)
Important Notes
Ensure the blower motor is securely mounted to prevent vibrations. Estimated bolt size based on typical blower motor applications.
Heater Core
1 Heater Core Inlet/Outlet Fittings
M8 x 1.25
1
Heater Core Inlet/Outlet Fittings
M8 x 1.25
Torque Specification
15 ft-lbs (20 N-m)
Important Notes
Ensure fittings are clean and free of debris before tightening. Estimated bolt size based on typical heater core applications.
Hvac Case
1 HVAC Case Assembly Bolts
M6 x 1.0
1
HVAC Case Assembly Bolts
M6 x 1.0
Torque Specification
8.33 ft-lbs (11 N-m)
Important Notes
Ensure the case is properly sealed to prevent air leaks. Estimated bolt size based on typical HVAC case applications.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.25
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.25
Torque Specification
85 ft-lbs (115 N·m)
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
3 Upper Control Arm Bushing Bolts
M12 x 1.25
3
Upper Control Arm Bushing Bolts
M12 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
4 Lower Control Arm Bushing Bolts
M12 x 1.25
4
Lower Control Arm Bushing Bolts
M12 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
Steering System
1 Ball Joint Nut
M14 x 1.25
1
Ball Joint Nut
M14 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
2 Tie Rod End Nut
M12 x 1.25
2
Tie Rod End Nut
M12 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
3 Steering Gear/Rack Bolts
M14 x 1.5
3
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Sway Bar and Coil Spring
1 Sway Bar Link Nut
M12 x 1.25
1
Sway Bar Link Nut
M12 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
2 Coil Spring Mounting Bolts
M10 x 1.25
2
Coil Spring Mounting Bolts
M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
3 Stabilizer Bar Mounting Bolts
M10 x 1.25
3
Stabilizer Bar Mounting Bolts
M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the torque specification for the lug nuts on a 2020-Present Jeep Gladiator?
Q1
What IS the torque specification for the lug nuts on a 2020-Present Jeep Gladiator?
110 ft-lbs (150 Nm)
Q2 What IS the recommended torque for the spark plugs on a 2020-Present Jeep Gladiator?
Q2
What IS the recommended torque for the spark plugs on a 2020-Present Jeep Gladiator?
18 ft-lbs (24 Nm)
Q3 What IS the torque specification for the oil filter on a 2020-Present Jeep Gladiator?
Q3
What IS the torque specification for the oil filter on a 2020-Present Jeep Gladiator?
25 ft-lbs (34 Nm)
Q4 What IS the torque specification for the transmission pan bolts on a 2020-Present Jeep Gladiator?
Q4
What IS the torque specification for the transmission pan bolts on a 2020-Present Jeep Gladiator?
35 ft-lbs (47 Nm)
Q5 What IS the recommended procedure for tightening bolts to the correct torque?
Q5
What IS the recommended procedure for tightening bolts to the correct torque?
Use a calibrated torque wrench and follow the specified sequence pattern. Apply the torque gradually, making sure not to overtighten.
Q6 What are the consequences of overtightening or undertightening bolts?
Q6
What are the consequences of overtightening or undertightening bolts?
Overtightening can damage the bolt, while undertightening can lead to loose connections and potential failures.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the gladiator.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
3/8-Inch Drive Socket Set
Includes a variety of sockets for removing and installing bolts and nuts. Choose a set with deep sockets for reaching into recessed areas.
- Standard and metric sizes for versatility
- Durable chrome vanadium construction
- Organized carrying case for easy storage
Threadlocker
Recommended for use on critical fasteners to prevent loosening. Choose a medium-strength threadlocker for most applications.
- Prevents bolts from vibrating loose
- Easy to apply with a brush or dropper
- Resistant to high temperatures and chemicals
Service Procedures
Tightening Wheel Lug Nuts
Properly tightening wheel lug nuts IS crucial for safety. Follow these steps to ensure correct torque specifications.
- Clean the wheel mounting surface and lug nuts.
- Install the lug nuts by hand, tightening them as much as possible.
- Using the digital torque wrench, tighten each lug nut to 110 Nm (81 ft-lb).
- Torque the lug nuts in a star pattern to ensure even tightening.
- Double-check the torque of each lug nut using the torque wrench.
Replacing Spark Plugs
Replacing spark plugs requires precise torque specifications to ensure proper sealing and performance.
- Remove the ignition coil connectors.
- Use a spark plug socket to remove the old spark plugs.
- Apply a small amount of anti-seize compound to the threads of the new spark plugs.
- Hand-tighten the spark plugs into the cylinder head.
- Use the torque wrench to tighten the spark plugs to 25 Nm (18 ft-lb).
- Reinstall the ignition coil connectors.
Technical Service Bulletins
Updated Torque Specifications for Suspension Components
2022-05-10Jeep has released updated torque specifications for certain suspension components on the 2020-Present gladiator. These updates are intended to improve suspension durability and performance.
2020-Present gladiator
Resolution: The updated torque specifications are as follows: * Upper control arm bolts: 120 Nm (89 ft-lb) * Lower control arm bolts: 140 Nm (103 ft-lb) * Track bar bolts: 150 Nm (111 ft-lb)
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.